This instrument is controlled by an intelligent microcontroller chip, with high precision, high reliability and high stability; AUTO RAMP function enables simultaneously testing action time and action current of fault; according to LCD icon prompts, there is an instruction to check whether the wiring is correct; after test is completed, the measurement results are automatically displayed; there are 0 \u00b0 and 180 \u00b0 phase options, which can detect quickest trigger time; “OL” is displayed for over range; the instrument is equipped with FUSE safety protection and CAT III 300V safety level.<\/p>\n
Digital Rcd(Elcb) Tester possesses the following features:<\/p>\n
1.This instrument is only suitable for single-phase 230V \/<\/p>\n
50Hz (with power supply voltage range<\/p>\n
2.Wiring check: whether three LED indicators are correct,
\nif two green indicators P-E and P-N are on, and red
\nindicator is not on, then it is correct: the test can only<\/p>\n
be triggered if the wiring is correct.<\/p>\n
\n3.Phase angle selection: you can choose to start the test<\/p>\n
from positive (0 \u00b0) or from half cycle negative (180 \u00b0);<\/p>\n
\n4.\u201cOL” is displayed for over range: when the test trip action<\/p>\n
time exceeds the maximum test time, the LCD will display “OL mS”<\/p>\n
\n5.Automatic data holding: After test is completed, the displayed<\/p>\n
measurement results are held for a certain period of time;<\/p>\n
\n6.AUTO RAMP test: The AUTO RAMP test can test tripping<\/p>\n
current and time simultaneously.<\/p>\n
\n7.Shutdown alarm function: After 3 minutes of operation, the<\/p>\n
instrument will let out a shutdown beep alarm;<\/p>\n
\n8.Built-in FUSE security protection;<\/p>\n
\n9.Power supply: directly supplied by circuit under test (power
\nsupply 230V \/ 50Hz);<\/p>\n
\n
\n
\n","protected":false},"excerpt":{"rendered":"
Digital Rcd(Elcb) Tester GT5206A This instrument is controlled by an intelligent microcontroller chip, with high precision, high reliability and high stability; AUTO RAMP function enables simultaneously testing action time and action current of fault; according to LCD icon prompts, there is an instruction to check whether the wiring is correct; after test is completed, the […]\n","protected":false},"featured_media":1338,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[169],"product_cat":[72],"product_tag":[170],"class_list":["post-1335","product","type-product","status-publish","has-post-thumbnail","product_brand-benetechco","product_cat-inspection-testing-equipment-trading","product_tag-digital-rcdelcb-tester-gt5206a","first","instock","taxable","shipping-taxable","product-type-simple"],"yoast_head":"\n