Elcometer 456 Coating Thickness Gauge Probe Range

Description
Reviews (0)

All Elcometer 456 Coating Thickness Gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Telescopic Probes for hard to reach places

Ferrous Probes (F)

Ferrous probes measure non-magnetic coatings on ferromagnetic substrates
Elcometer 456 ferrous gauges accept any ferrous probe

Non-Ferrous Probes (N)

Non-ferrous probes measure non-conductive coatings on non-ferrous metal substrates
Elcometer 456 non-ferrous gauges accept any non-ferrous probe

Dual Probes (FNF)

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection
Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes

High Temperature

Elcometer probes have a maximum operating temperature of 80°C (176°F)*
Separate ferrous probes have a maximum operating temperature of 150°C (300°F)*
Hi-Temperature PINIP™ has a maximum operating temperature of 250°C (480°F)*

*The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

Summary

Elcometer 456 Coating Thickness Gauge Probe Range

Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.

Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.

Key Features

Elcometer 456 Coating Thickness Gauge Probe Range

Straight Probes

Standard Straight Probe

Standard Straight Probe
Standard probes measure coatings on both flat and curved surfaces.

Anodising Probe
Chemical resistant & washable – ideal for the anodising environment.

Mini Probe
Mini probes are ideal for harder to reach areas and edges.

Waterproof Probe
Sealed for use underwater at depth, even in diving gloves.

Soft Coatings Probe Soft Coating Probe
Large surface area probes are for soft materials (HVCA approved).

Thick Coatings Probe
Ideal for measuring coatings up to 31mm thick.

Scan Probes

Standard Scan Probe
Rapidly scan large surface areas without damaging the probe or the coating.

Ball Bearing Scan Probe
Clip on adaptors for large coated structures, abrasive coatings and pre-construction primers.

Angled Probes

Right Angle Probe
Take readings in areas with restricted clearance.

Mini Right Angle Probe
For measuring coatings on edges, narrow pipes or small surface areas.

Telescopic Probe
Extending probes for hard to reach areas.

45° Angle Probe
Measure difficult to access or complex areas.

Plug In Integral Probes (PINIP™)

PINIP Probe PINIP™ Integral Probe
Transforms a separate gauge into an integral gauge, ideal for single-handed use.

High Temperture PINIP Probe Hi-Temperature PINIP™
Measure coatings on ferrous substrates up to 250°C (480°F).

Armoured Cable Probes

F / FNF Armoured Probe
Reinforced heavy duty cables reduce the risk of cable damage.

Technical Specification

Elcometer 456 Coating Thickness Gauge Probe Range

Scale 0.5: Range : 0-500μm (0-20mils)
Accuracy^a	(±1-3% or ±0.1mil)
Range	0-500μm (0-20mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3—A	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R90A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM3R45A	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3—C	6mm (0.24”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CFM3R90C	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
45° Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R45D	18mm (0.71”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)
Right Angle Mini Probe Probe Length: 300mm (11.80”)^c	T456CFM3R90D	16mm (0.63”)	3mm (0.12”)	1.9mm (0.07″)	6.5mm (0.26″)

Non-Ferrous (N)
Straight Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3—A	6mm (0.24”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNM3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Straight Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3—C	6mm (0.24”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNM3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNM3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)

Non-Ferrous – Graphite (N)
Right Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CNMG3R90A	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Right Angle Mini Probe Probe Length: 150mm (5.90”)^c	T456CNMG3R90C	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)
Right Angle Mini Probe Probe Length: 400mm (15.70”)^c	T456CNMG3R90E	16mm (0.63”)	4mm (0.16”)	6mm (0.24″)	8.5mm (0.33″)

Scale 1: Range : 0-1500μm (0-60mils)
Accuracy^ae	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
Range^d	0-1500μm (0-60mils)
Resolution	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF1S	85mm (3.35”)	4mm (0.16”)	4mm (0.16″)	25mm (0.98″)
Straight Probe – sealed Probe Length: 45mm (1.77”)^c	T456CF1E	85mm (3.35”)	4mm (0.16”)	4mm (0.16″)	25mm (0.98″)
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF1U	86mm (3.38”)	15mm (0.59”)	Flat Surface	Flat Surface
Scan Probe – armoured Probe Length: 45mm (1.77”)^c	T456CF1UARM	140mm (5.51”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF1R	28mm (1.10”)	4mm (0.16”)	4mm (0.16″)	25mm (0.98″)
90° Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12″)	6.5mm (0.26″)
90° Mini Probe – sealed Probe Length: 45mm (1.77”)^c	T456CFME5R90A	16mm (0.63”)	4mm (0.16”)	3mm (0.12″)	6.5mm (0.26″)
90° Mini Probe – sealed, 2m cable Probe Length: 45mm (1.77”)^c	T456CFME5R90A-2	16mm (0.63”)	4mm (0.16”)	3mm (0.12″)	6.5mm (0.26″)
PINIP™ Integral Probe	T456CF1P	170mm (6.69”)	4mm (0.16”)	4mm (0.16″)	60mm (2.36″)

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN1S	85mm (3.35”)	4mm (0.16”)	10mm (0.39″)	10mm (0.39″)
90° Probe Probe Length: 45mm (1.77”)^c	T456CN1R	28mm (1.10”)	4mm (0.16”)	10mm (0.39″)	14mm (0.55″)
Mini 90° Probe Probe Length: 45mm (1.77”)^c	T456CNM5R90A	16mm (0.63”)	4mm (0.16”)	10mm (0.39″)	8.5mm (0.33″)
Mini 90°Probe Probe Length: 150mm (5.90”)^c	T456CNM5R90C	16mm (0.63”)	4mm (0.16”)	10mm (0.39″)	8.5mm (0.33″)
Mini 90° Probe Probe Length: 400mm (15.7”)^c	T456CNM5R90E	16mm (0.63”)	4mm (0.16”)	10mm (0.39″)	8.5mm (0.33″)
Anodiser Probe Probe Length: 45mm (1.77”)^c	T456CN1AS	100mm (3.94”)	4mm (0.16”)	10mm (0.39″)	14mm (0.55″)
PINIP™ Integral Probe	T456CN1P	180mm (7.09”)	4mm (0.16”)	10mm (0.39″)	50mm (1.97″)

Ferrous & Non-Ferrous (FNF)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CFNF1S	88mm (3.46”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16″) N: 26mm (1.02″)	12.5mm (0.49″)
Straight Probe – armoured cable Probe Length: 45mm (1.77”)^c	T456CFNF1ARM	185mm (7.28″)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16″) N: 26mm (1.02″)	12.5mm (0.49″)
Scan Probe Probe Length: 45mm (1.77”)^c	T456CFNF1U	89mm (3.50”)	15mm (0.59”)	Flat Surface	Flat Surface
Right Angle Probe Probe Length: 45mm (1.77”)^c	T456CFNF1R	38mm (1.50”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16″) N: 26mm (1.02″)	12.5mm (0.49″)
PINIP™ Integral Probe	T456CFNF1P	180mm (7.09”)	F: 4mm (0.16”), N: 6mm (0.24”)	F: 4mm (0.16″) N: 26mm (1.02″)	65mm (2.56″)

Scale 2: Range : 0-5mm (0-200mils)
Accuracy^ae	±1-3% or ±20μm (±1-3% or ±1.0mil)
Range^d	0-5mm (0-200mils)
Resolution	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF2S	89mm (3.50”)	8mm (0.32”)	4mm (0.16″)	25mm (0.98″)
Scan Probe Probe Length: 45mm (1.77”)^c	T456CF2U	90mm (3.54”)	15mm (0.59”)	Flat Surface	Flat Surface
90° Probe Probe Length: 45mm (1.77”)^c	T456CF2R	32mm (1.26”)	8mm (0.32”)	4mm (0.16″)	25mm (0.98″)
Straight Probe – armoured cable Probe Length: 45mm (1.77”)^c	T456CF2ARM	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	25mm (0.98″)
Telescopic Probe Probe Length: 56-122cm (22-48”)^c	T456CF2T	36mm (1.42”)	8mm (0.32”)	4mm (0.16″)	25mm (0.98″)
Soft Coating Probe Probe Length: 45mm (1.77”)^c	T456CF2B	89mm (3.50”)	8mm (0.32”)	Flat Surface	Flat Surface
Waterproof Probe – 1m (3’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
Waterproof Probe – 5m (15’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-5	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
Waterproof Probe – 15m (45’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-15	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
Waterproof Probe – 30m (98’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-30	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
Waterproof Probe – 50m (164’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-50	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
Waterproof Probe – 75m (250’) cable Probe Length: 45mm (1.77”)^c	T456CF2SW-75	138mm (5.43”)	8mm (0.32”)	4mm (0.16″)	40mm (1.98″)
PINIP™ Integral Probe	T456CF2P	174mm (6.85”)	8mm (0.32”)	4mm (0.16″)	60mm (2.36″)
Hi-Temperature PINIP™	T456CF2PHT	174mm (6.85”)	8mm (0.32”)	4mm (0.16″)	60mm (2.36″)

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN2S	88mm (3.46”)	14mm (0.55”)	100mm (3.97″)	150mm (5.90″)
PINIP™ Integral Probe	T456CN2P	185mm (7.28″)	14mm (0.55”)	100mm (3.97″)	150mm (5.90″)

Scale 3: Range : 0-13mm (0-500mils)
Accuracy^a	±1-3% or ±50μm (±1-3% or ±2.0mils)
Range^d	0-13mm (0-500mils)
Resolution	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF3S	102mm (4.02”)	14mm (0.55”)	15mm (0.59″)	40mm (1.98″)
PINIP™ Integral Probe	T456CF3P	184mm (7.24”)	14mm (0.55”)	15mm (0.59″)	45mm (1.77″)

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN3S	170mm (6.69”)	35mm (1.38”)	Flat Surface	Flat Surface

Scale FM7: Range: 0.60-3.8mm (25-150mils)
Accuracy^a	±7.5% or ±114μm (±7.5% or ±4.5mils)
Range^d	0.60-3.8mm (25-150mils)
Resolution	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
45° Angle Mini Probe Probe Length: 45mm (1.77”)^c	T456CFM7R45A	20mm (0.79”)	6.5 mm (0.26’’)	–	–

Scale 6: Range : F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
Resolution	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CF6S	150mm (5.90”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40″)	170mm (6.70″)
Straight Probe – armoured cable Probe Length: 45mm (1.77”)^c	T456CF6ARM	190mm (7.48”)	51 x 51mm2 (2.17 x 2.17 inch2)	35mm (1.40″)	170mm (6.70″)

Non-Ferrous (N)
Straight Probe Probe Length: 45mm (1.77”)^c	T456CN6S	160mm (6.30”)	58mm (2.29”)	Flat Surface	Flat Surface
Straight Probe – armoured cable Probe Length: 45mm (1.77”)^c	T456CN6ARM	200mm (7.87″)	58mm (2.29”)	Flat Surface	Flat Surface

Scale 7: Range : 0-31mm (0-1220mils)
Accuracy^a	±1-3% or ±100μm (±1-3% or ±4.0mils)
Range^d	0-31mm (0-1220mils)
Resolution	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils: 100-1220mils)
Certificate
Description	Part Number	Minimum Headroom	Minimum Sample Diameter^b	Minimum Convex Surface Diameter	Minimum Concave Surface Radius
Ferrous (F)
Straight Probe armoured cable Probe Length: 45mm (1.77”)^c	T456CF7ARM	200mm (7.87″)	55 x 55mm² (2.17 x 2.17 inch²)	40mm (1.58″)	170mm (6.70″)

a. Whichever is the greater
b. FNF (F): FNF probe in F Mode / FNF (N): FNF probe in N
c. Probe length is measured from X to Y
d. Excluding Scan Probe end cap
e. Scan Probe accuracy is ±3% or ±0.02mm (0.8mil) with cap fitted, ±1-3% or ±0.02mm (0.8mil) without cap, when calibrated using a sample of the uncoated substrate
● Test Certificate supplied as standard.
Elcometer 456 Probes are covered by a one-year warranty

Part Numbers

Elcometer 456 Coating Thickness Gauge Probe Range

Substrate Probe

Range
Accuracy
Probe Length
Minimum Headroom
Minimum Sample Diameter

Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:300mm (11.80”)
- Minimum Headroom:18mm (0.71”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3R45D
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:300mm (11.80”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3R90D
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:6mm (0.24”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3—C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3R45A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
- Substrate Probe:Ferrous (F) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:6mm (0.24”)
- Minimum Sample Diameter:3mm (0.12”)
- Part Number : T456CFM3—A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous (N) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM3R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous (N) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous (N) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:6mm (0.24”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM3—C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous (N) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous (N) Probes
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:6mm (0.24”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM3—A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous – Graphite (N)
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNMG3R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous – Graphite (N)
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNMG3R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Mini Probe – Scale 0.5
- Substrate Probe:Non-Ferrous – Graphite (N)
- Range:0-500μm, 0-20mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNMG3R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 45° Angle Mini Probe – Scale FM7
- Substrate Probe:Ferrous (F) Probes
- Range: 0.60-3.8mm, 25-150mils
- Accuracy:±7.5% or ±114μm, ±7,5% or ±4,5mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:20mm (0.79”)
- Minimum Sample Diameter:6.5 mm (0.26’’)
- Part Number : T456CFM7R45A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:85mm (3.35”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CF1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom: 86mm (3.38”)
- Minimum Sample Diameter:15mm (0.59”)
- Part Number : T456CF1U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe Armoured – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:140mm (5.51”)
- Minimum Sample Diameter:15mm (0.59”)
- Part Number : T456CF1UARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:28mm (1.10”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CF1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CFM5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CFME5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Mini Probe sealed, 2m cable – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CFME5R90A-2
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom:170mm (6.69”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CF1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:85mm (3.35”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CN1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe sealed – Scale 1
- Substrate Probe:Ferrous (F) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:85mm (3.35”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CF1E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:28mm (1.10”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CN1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM5R90A
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:150mm (5.90”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM5R90C
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Mini 90° Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length: 400mm (15.70”)
- Minimum Headroom:16mm (0.63”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CNM5R90E
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom:180mm (7.09”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CN1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Anodiser Probe – Scale 1
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:100mm (3.94”)
- Minimum Sample Diameter:4mm (0.16”)
- Part Number : T456CN1AS
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 1
- Substrate Probe:Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:88mm (3.46”)
- Minimum Sample Diameter:F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 1
- Substrate Probe:Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:89mm (3.50”)
- Minimum Sample Diameter:15mm (0.59”)
- Part Number : T456CFNF1U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Right Angle Probe – Scale 1
- Substrate Probe:Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:38mm (1.50”)
- Minimum Sample Diameter:F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 1
- Substrate Probe:Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Minimum Headroom:180mm (7.09”)
- Minimum Sample Diameter:F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable – Scale 1
- Substrate Probe:Ferrous & Non-Ferrous (FNF) Probes
- Range: 0-1,500μm, 0-60mils
- Accuracy:±1-3% or ±2.5μm, ±1-3% or ±0.1mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:185mm (7.28″)
- Minimum Sample Diameter:F: 4mm (0.16”), N: 6mm (0.24”)
- Part Number : T456CFNF1ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:89mm (3.50”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe Armoured Cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Scan Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:90mm (3.54”)
- Minimum Sample Diameter:15mm (0.59”)
- Part Number : T456CF2U
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge 90° Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:32mm (1.26”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2R
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Telescopic Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:56-122cm (22-48”)
- Minimum Headroom:36mm (1.42”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2T
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Soft Coating Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:89mm (3.50”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2B
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 1m (3’) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 5m (15″) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW-5
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 15m (45″) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW-15
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 30m (98″) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW-30
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 50m (164″) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW-50
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Waterproof Probe 75m (250″) cable – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:138mm (5.43”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2SW-75
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom:174mm (6.85”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Hi-Temperature PINIP™ – Scale 2
- Substrate Probe:Ferrous (F) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom:174mm (6.85”)
- Minimum Sample Diameter:8mm (0.32”)
- Part Number : T456CF2PHT
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 2
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Probe Length:45mm (1.77”)
- Minimum Headroom:88mm (3.46”)
- Minimum Sample Diameter:14mm (0.55”)
- Part Number : T456CN2S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 2
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-5mm, 0-200mils
- Accuracy:±1-3% or ±20μm, ±1-3% or ±1.0mil
- Minimum Headroom:185mm (7.28″)
- Minimum Sample Diameter:14mm (0.55”)
- Part Number : T456CN2P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 3
- Substrate Probe:Ferrous (F) Probes
- Range: 0-13mm, 0-500mils
- Accuracy:±1-3% or ±50μm, ±1-3% or ±2.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:102mm (4.02”)
- Minimum Sample Diameter:14mm (0.55”)
- Part Number : T456CF3S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge PINIP™ Integral Probe – Scale 3
- Substrate Probe:Ferrous (F) Probes
- Range: 0-13mm, 0-500mils
- Accuracy:±1-3% or ±50μm, ±1-3% or ±2.0mils
- Minimum Headroom:184mm (7.24”)
- Minimum Sample Diameter:14mm (0.55”)
- Part Number : T456CF3P
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 3
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils
- Accuracy:±1-3% or ±50μm, ±1-3% or ±2.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:170mm (6.69”)
- Minimum Sample Diameter:35mm (1.38”)
- Part Number : T456CN3S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 6
- Substrate Probe:Ferrous (F) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy:±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:150mm (5.90”)
- Minimum Sample Diameter:51 x 51mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF6S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 6
- Substrate Probe:Ferrous (F) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy:±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:190mm (7.48”)
- Minimum Sample Diameter:51 x 51mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF6ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe – Scale 6
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy:±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:160mm (6.30”)
- Minimum Sample Diameter:58mm (2.29”)
- Part Number : T456CN6S
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 6
- Substrate Probe:Non-Ferrous (N) Probes
- Range: 0-13mm, 0-500mils, F: 0-25mm, N: 0-30mm, F: 0-980mils, N: 0-1,200mils
- Accuracy:±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:200mm (7.87″)
- Minimum Sample Diameter:58mm (2.29”)
- Part Number : T456CN6ARM
- Certification : Test Certificate
Elcometer 456 Coating Thickness Gauge Straight Probe armoured cable – Scale 7
- Substrate Probe:Ferrous (F) Probes
- Range: 0-31mm, 0-1220mils
- Accuracy:±1-3% or ±100μm, ±1-3% or ±4.0mils
- Probe Length:45mm (1.77”)
- Minimum Headroom:200mm (7.87″)
- Minimum Sample Diameter:55 x 55mm2 (2.17 x 2.17 inch2)
- Part Number : T456CF7ARM
- Certification : Test Certificate
Rasam Tanin Company offers all STARMANS ELECTRONICS products in the Dubai , UAE and the Gulf.
Fill in the contact form to request the price